What is the factors of affecting thediamond saw bladelife?
(1)Diamond Blade Rotation Speed:in practice, the line speed diamond saw blades by equipment
conditions, saw the quality and nature of the stone before cutting
restrictions. From the optimum blade life and cutting efficiency,
it should be selected depending on the nature of the stone saw
blade speed. Sawing granite, the blade speed at 25m ~ 35m / s
within the selected range. For high quartz content and difficult
cutting granite, remove the blade speed limit is appropriate. cubic
boron nitride tiles in the production, the use of smaller diameter
diamond saw blade, the line speed can reach 35m / s.
(2)Cutting Depth:diamond cutting depth is related to wear, effective cutting, saw
cutting force conditions and the nature of the important parameters
of stone. Generally speaking, when the line Polycrystalline diamond
saw blade is high, should be selected for cutting of small depth,
from the current technology, the cutting depth of the diamond can
choose between 1mm ~ 10mm. Usually with a large diameter saw blade
cutting granite blocks, the cutting depth can be controlled within
1mm ~ 2mm between the feed rate should be reduced at the same time.
When the line speed diamond saw blade is large, a large cutting
depth should be selected. But in performance and tool strength saw
the extent permitted, should try to take a greater depth of cut
synthetic diamond to improve cutting efficiency. When the machined
surface when requested, should be used small depth of cut.
(3)Feed speed:Cutting feedrate incurs stone feed rate. Its size sawing rate
impact, the force and the cutting blade heat dissipation area. Its
value should be based on the nature of the selected cutting stone.
Generally speaking, sawing softer stone, such as marble, may be
appropriate to increase the feed speed, if the feed rate is too
low, more conducive to high cutting rates. Sawing fine structure,
relatively homogeneous granite, may be appropriate to increase the
feed speed, feed rate is too low if the diamond blade easily be
polished. But sawing UNEVEN coarse granite structure, should reduce
feed speed, otherwise it will cause the blade vibration and reduce
fragmentation leading diamond cutting rates. Granite cutting feed
rate is generally 9m ~ 12m/min within the selected range.
a. Diamond Blade Saws – What Makes Them Unique?
b. Grinding and Abrasive Tools improvement.
c. How to Choose the Best Diamond Blade?